Crown XTI6000 Omschrijving Sensitivity (volts RMS) for full rated power at 4 ohms 1.4V Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted 100 dB (103 dB in XTi 6000) Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors. AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) XTi 1000: 6.8A, XTi 2000: 8.3A, XTi 4000: 10.5A; at idle draws no more than 30 watts. XTi 6000: 15.3A; at idle draws no more than 180 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load impedance (note: safe with all types of loads) Stereo Bridge mono 2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions) 4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) Voltage Gain (at 1 kHz, 8 ohm rated output) XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB. Maximum Input Signal +22 dBu typical Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V, 220-240V 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D XTi 6000 is 16.2 in. (41.15 cm) D Net Weight, Shipping Weight 18.5 lb (8.4 kg), 21.5 lb (9.8 kg) XTi 6000 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg) Artikelnummer : crownxti6000 van € 3.147,- Voor € 2.241,-